Go to content

Saint Paul Electrical Station - How to turn it on.

Dying Light 2 > How to...



QUEST STEPS WITH VIDEO TIMES
1 - Get inside the Electrical Power Station
2 - Open the gates without power / Turn on Generator 1
3 - How to turn on Generator 2
4 - How to turn on Generator 3
5 - Go to the control room.



1 - Get inside the Electrical Power Station

First, there is a graffiti on the grounds called Hell Hound. You may want to get that if you haven't already.
Go to the metal frames on the side of the Electrical Power Station and climb them. You can jump onto the roof from there to get inside the Power Station through the broken windows.



2 - Open the gates without power / Turn on Generator 1

Inside, you may want to look around for some tools to collect but to get this Station powered, we start off at the ground floor.
Here we have:
- Red Generator 1
- Unpowered Gate A
- Unpowered Gate B



Green generator 1 is underwater below Red generator 1. Dive down and get the cable to connect it with Gate A.
Now you can push the button to open the gate. There is also another Gate A underwater but you don't have to open it if you don't want to.



Green generator 1 is underwater below Red generator 1. Dive down and get the cable to connect it with Gate A.
Now, behind Gate A is Red Generator 2.
Push the button to open the gate. There is also a Gate A one floor up and one floor down. Total 3 Gates A. Opening those is not necessary. I suggest you do the flooded one just in case.



Same needs to be done with Gate B. You can either take the cable directly from Gate A and attach it to Gate B or you can dive down again to Green Generator 1, get the cable and go to Gate B.



Behind Gate B is Red Generator 3.
There is an Inhibitor box on the flooded floor of Gate B.
You can, but don't have to, open the other two Gate B's. It's not necessary to power the station.
I suggest you do the flooded one just in case.

Then you can go and connect Green Generator 1 with Red Generator 1. This one is not needed anymore.



3 - How to turn on Generator 3

We're starting with Generator 3 first. Go to the Gate B area and go down the stairs into the flooded area.
There is a passage you can dive through straight ahead coming from the stairs. It leads into a staircase going down. Dive down and through to the flooded room.
In this room is Gate C. Dive through and up the staircase in this new room to get to a aired area with Generator C.




Take the cable from Green Generator C and connect it to underwater Red Generator C.
When you dive down, just follow the yellow cables on the floor to get to it.
Then, open Gate C.



You can now take the cable from Green Generator 3, dive through the now open gate and connect it to Red Generator 3.



Dive through the gate, up the stairs. You can breath up on the ceiling of this room. Here is also Green Generator 3.
Follow the yellow cables again to a gate you can unlock. It leads to the main area with Generator 1.
You can now take the cable from Green Generator 3, dive through the now open gate and connect it to Red Generator 3.



4 - How to turn on Generator 2

Go to the Gate A area and go down the stairs into the flooded area.
There is a long corridor you can follow underwater with dead bodies. Follow the yellow arrow down the staircase, then the yellow cable on the floor.
It leads to a gate you can open that goes back to the main area.




Catch your breath and dive back through the gate you just opened and you will see Green Generator 2 on the level above you. Before you connect the generators now, make sure to open another Gate on the same level as Green Generator 2.
Now connect Green Generator 2 with Red Generator 2 through the above gate. Otherwise the cable won't reach.




5 - Go to the control room.

Take the elevator up to the control room, turn on the Electrical Station and choose your faction.
Back to content